BBN sold NM400 material meaning to Romania

The main function of boron in NM400 material meaning and so on steel is to increase the hardenability of steel, so as to save other rare and precious metals, such as nickel, chromium and molybdenum. For this purpose, the boron content is generally regulated in the range of 0.001% - 0.005%. It can replace 1.6% nickel, 0.3% chromium or 0.2% molybdenum. It should be noted that molybdenum can prevent or reduce temper brittleness, while boron slightly promotes temper brittleness, so molybdenum can not be completely replaced by boron.

Wear resistant steel plate is a kind of special plate product specially used under the condition of large area wear. At present, the commonly NM400 material meaning used wear-resistant steel plate is a plate product made by overlaying a certain thickness of hard and wear-resistant alloy wear-resistant layer on the surface of ordinary low carbon steel or low alloy steel with good toughness and plasticity. The wear-resistant steel plate NM400 material meaning consists of two parts: carbon steel plate and alloy wear-resistant layer.

The steel plate and strip after hot rolling treatment are generally called hot rolled plate. Compared with other steel plate processing industries, NM400 material meaning, hot rolled plate has these characteristics. First, low hardness, easy processing. Compared with other steel needs special mechanical equipment, hot rolled plate is a very convenient for processing. Second, good ductility, not easy to break, good compression capacity, long service life. Third, the manufacturing process is simple, and the price and cost are relatively cheap compared with other steels.

In the past 10 years, domestically-made offshore platform steel has been widely adopted in China's offshore oil projects, and offshore platform steel has gradually developed in the direction of high strength. Relevant data show that the pile legs, pile boots, cantilever beams and other key parts of the jack-up platform require high load. In order to improve the stability of the hull during towing after floating, it needs to be lightweight, and high-strength steel plates must be used.