What is the effect of surface treatment on performance of nm500 steel material

Titanium microalloying is an element of NM500 steel material strengthening complex with carbon and nitrogen. The addition of micro amount of titanium in the steel can fix almost all nitrogen and part carbon in the steel, so as to eliminate the strain aging phenomenon and improve the aging impact performance of the steel. At the same time, it can refine the grains and change the morphology of the compounds. According to the atomic weight ratio of Ti and N in NM500 steel material tin formula (Ti = 3.4n), the content of Ti in steel should be controlled between 0.015 and 0.025%. Generally, the amount of ferrotitanium added to each ton of steel is 1kg.

In order to prevent the deformation of NM500 steel material, wear-resistant composite plate during preheating, the steel plate with good quality should be selected first. The steel plate with serious carbide segregation should be reasonably cast and heat treated by quenching and tempering. For the large and non cast wear-resistant composite plate, the solution double refining heat treatment can be carried out. At the same time, the heating temperature should be reasonably selected and the heating speed should be controlled.

Hot Rolled Plates NM500 steel material MachiningAfter final forging/forming and Heat treatment process, all the pipe Fittings, Flanges, Fasteners, Etc. are sent for machining i.e. and preparation, O/D and I/D matching as per dimensional codes. An Expert Q.C. engineer is involved and he keeps constant vigil on every machining operation. Step machining is carried out as required by the codes. GO and NO-GO gauges are used to check the O/D & I/D of the fittings, Flanges, etc.

From the perspective of market conditions, today NM500 steel material spot prices are operating smoothly, futures are volatile, and market acceptance is average. Merchants have a wait-and-see attitude. Low-price transactions are average, while high-price transactions are poor. Most merchants have daily transactions of 200-300 tons. between. For the market outlook, most merchants adopt the mode of selling more and lowering the warehouse, and are cautious about the later market.