raex 500 vs hardox 500 steel sheet/carbon steel plate

Focusing on the energy conservation and emission reduction objectives proposed by the municipal government, the company gives full play to the advantages of raex 500 vs HARDOX 500 circular economy formed after the comprehensive completion and operation, and vigorously promotes the implementation of energy conservation objectives. Through measures such as energy saving, technological innovation and raex 500 vs HARDOX 500 management strengthening, the energy saving target of annual reduction of added value energy consumption by 7%. It has made great contribution to energy saving of over completion.

Although Q345E steel plate has stronger torsion resistance and better corrosion resistance than ordinary steel plate, there are still some environments that can cause corrosion to Q345E steel plate. The following environment should be avoided as far as possible to avoid corrosion of raex 500 vs HARDOX 500, Q345E steel plate. 1. Acid water. 2. Salt water. 3. Nitric acid. 4. Atmospheric erosion. Atmospheric erosion for Q345E steel plate corrosion is reflected in the chloride and pollutant pollution source of Q345E steel plate corrosion, this corrosion is very serious.

Strip steel is a kind of steel plate with thin thickness, narrow width and long length. Strip steel can be made of common carbon steel, carbon structural steel, spring steel, tool steel, stainless steel, etc. Strip steel has the advantages of high dimensional accuracy, good surface quality, easy processing and material saving. There are many kinds of strip steel, raex 500 vs HARDOX 500. Hot rolled steel strip is mainly used for cold-rolled billets, cold-formed steel billets, welded steel pipe billets, manufacture of bicycles and small hardware products.

"Our mill has three production lines:1).2500mm production line (Width: 1600-2300mm, raex 500 vs HARDOX 500 Thickness: 6-30mm, Annual capacity: 1,600,000 Tons; 2).3500mm production line (Width: 2000-3050mm, Thickness: 10-80mm, Annual capacity: 2,000,000 Tons; 3).4300mm production line (Width: 1500-4100mm, Thickness: 6-300mm, Annual capacity: 1,800,000 Tons; The weight of each ingot can reach raex 500 vs HARDOX 500 44 tons, which is at the leading level in China. In addition, we have a 1700mm hot-rolled coil production line (width range: 900-1550mm, thickness range: 1.2-25.4mm, annual raex 500 vs HARDOX 500 production capacity: 3.5 million tons."

raex 500 vs HARDOX 500, Chinese material Q235B is one of the most widely used carbon steel in the world. Some like to compare its strength with other equivalent steel grades. We need to take care that the Q235B steel strength varies with thickness. For the min. yield strength of Q235B steel plate: it is 235Mpa if thickness ≤16mm, 225 Mpa for thickness 16-40mm, 215 Mpa for thickness 40-60mm, 205 Mpa for thickness 60-100mm, 195 Mpa for thickness 100-150mm, 185 Mpa for thickness over 150mm. The tensile strength of Q235B steel plate is 375-500 Mpa.

We have a professional after-sales department to collect all information related to customers, so as to make relevant treatment in time according to the information, and file it; guide the user's product use methods and precautions; coordinate with the sales department, visit customers regularly, understand the customer's use and new requirements, and make a customer visit record; When communicating with customers, they should be enthusiastic and careful to understand the situation of product problems and put forward solutions