Industrial use hardox 500 equivalent
Over the years, the company has established a standard of HARDOX 500 equivalent steel products pre-sale, in sale and after-sale service, which meets customers' needs in all aspects and in the whole process, so that our products and services are deeply trusted by customers, and has established a long-term cooperation and mutual benefit relationship with customers. The company adheres to HARDOX 500 equivalent quality surpervision, comprehensively implements quality management, strictly controls the whole process of product from contract signing to after-sales service.
For S420NL weldable fine grain structural steel plate, it is produced under specification EN 10025-3. The yield strength of S420NL plate shall be above 420Mpa for the thickness below 16 millimeter, 400MPa min. for thickness below 40mm, 390MPa min. for thickness below 63mm. The tensile strength for thickness below 100mm of this steel grade S420NL shall be within 520-680Mpa. For the Mill test certificates of steel S420NL,HARDOX 500 equivalent, our mill would like to issue format according to EN 10204 3.1.
Pipeline steel is a kind of steel specially used for transporting natural gas and petroleum with special requirements. Why do oil and gas pipelines use pipeline steel as the transportation pipeline? Because pipeline steel has the following characteristics. First, the pipeline steel is strong, and it is not easy to break. If it breaks during transportation, the consequences are unimaginable. Second, the HARDOX 500 equivalent, pipeline steel is durable. Pipeline steel is buried deep underground for a long time and has good corrosion resistance. Third, the pipeline steel is resistant to high temperature and will not deform under high temperature.
The related factors of HARDOX 500 equivalent steel plate cutting are mainly steel plate material, steel plate specific use and steel plate cutting requirements, so it can be said that there are many related factors. Different processing methods, such as finish machining and rough machining, choose different HARDOX 500 equivalent steel plate cutting methods. Wire cutting or plasma cutting is used for finishing and flame cutting is used for rough machining. Therefore, it can be concluded that the steel plate cutting methods selected under different processing methods are different.
NM450 steel plate thickness≦80mm. HARDOX 500 equivalent, NM450 wear-resistant steel plates are used in engineering machinery, mining machinery, coal mining machinery, environmental protection machinery, metallurgical machinery, abrasive tools, bearings and other product parts.NM450 Cchemical composition: C≤0.35; Si≤0.70; Mn≤1.70; P≤0.025; S≤0.010; Cr≤1.10; Ni≤0.80; Ti≤0.050; Mo≤0.55; B: 0.0005-0.006; Al≥0.010. Mechanical properties: Tensile strength Rm / MPa ≧ 25; -20 ℃ impact energy absorption (longitudinal) KV2 / J ≧ 24Surface Brinell hardness HBW: 420-480
Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel HARDOX 500 equivalent plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.
