hardox 500 specification carbon steel plates
Our quality control department will do inspection for details of the steel materials HARDOX 500 specification before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.
Manganese steel plate is subdivided according to material grade: Q345A, Q345B, Q345C, Q345D, Q345E, HARDOX 500 specification. The main differences according to the classification are as follows: A needs no impact test, B needs room temperature impact test (20 degrees above zero), C needs zero degree impact test, D needs minus 20 degree impact test, and E needs minus 40 degree impact test. The most important characteristic of manganese steel plate is that under the condition of strong impact and extrusion, the surface layer rapidly hardens, but the core still maintains good toughness and plasticity, and the hardened layer has good wear resistance.
Chemical composition of 42CrMo seamless steel pipe: C: 0.38-0.45, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.90-1.20, Mo: 0.15-0.25, V: 0.15-0.30. Mechanical properties of 42CrMo seamless steel pipe: tensile strength: 1080 MPa, yield strength: 930 MPa, elongation after fracture: 12%, reduction of area: 45%, impact energy: 63J. Due to the effect of carbon and chromium content, HARDOX 500 specification, 42CrMo seamless steel pipe has better strength and hardenability, higher fatigue strength and resistance to multiple impact after quenching and tempering, good impact toughness at low temperature and no obvious temper brittleness. It is generally used after quenching and tempering.
In actual processing applications, the processing HARDOX 500 specification thickness of flame cutting ranges from 6 to 200 mm, and the HARDOX 500 specification cutting thickness can even reach 350 mm by replacing the air pipe and cutting torch nozzle. In order to better improve the cutting quality, the related process parameters will be slightly different when using flame cutting for materials of different thickness. The verticality of the cutting surface processed by the CNC flame cutting machine is generally high, and the slope can be controlled below 2-3°. The characteristic is that flame cutting performs better when cutting HARDOX 500 specification with a certain thickness above 10mm.
Since its establishment, the company has been deeply supported and loved by customers with its unique business philosophy and business model. The company has always adhered to the tenet of "credibility first, integrity-based, quality first" and sincerely serves new and old customers. At the same time, it keeps pace with the times based on market orientation, continuously expands offline channels, and gradually establishes a complete online E-commerce business management platform. We will always promote our after-sales service to make client satisfied with our goods.
[Enterprise Spirit]: professional, honest, dedicated and innovative.[Enterprise Tenet]: provide customers with satisfactory steel products and services.[Enterprise Policy]: customer satisfaction is our pursuit. The trust of customers is our achievement.[Service Tenet]: to develop the market with quality and grow with sincerity.The company adheres to the commitment of quality first and customer foremost, takes high quality and high efficiency as the service principle, takes mutual benefit and common development as the business purpose.
