hardox 450 welding Price in Norway 2020

Chrome-Moly low alloy steel Hardox 450 welding series contains 0.5% - 9% Cr and 0.5% - 1% Mo and lower than 0.20% carbon. 40CrNiMoA, 4340 and SNCM439 are the low alloy chromoly steel materials from the different standards. 40CrNiMoA steel Hardox 450 welding is a Chinese standard chromium-molybdenum high strength steel with good hardenability and toughness.

Our company doesn't need the cheapest quotation to choose international logistics company, but the price performance ratio will be high, the service will be good, and the transportation must be safe and punctual, which will not affect the time when the Hardox 450 welding goods arrive at the destination, and the logistics situation will be well communicated with customers in advance. Therefore, when we choose international logistics companies, we will have a look at their timeliness and service attitude in advance. It is only important to transport goods according to the requirements of customers for logistics.

Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.

In year 2015, we supplied 950 tons S355J0 angle steel to Egypt government. We have cooperation with local government for more than 3 years. Every year, they would order more than 3000 tons of Hardox 450 welding steel from our company.

Chemical elements of 35CrMnSi steel: C: 0.32-0.39, Si: 1.10-1.40, Mn: 0.80-1.10, Cr: 1.10-1.40. The mechanical properties of 35CrMnSi steel: tensile strength 1620 MPa; yield strength 1280 MPa; elongation after fracture: 9%; reduction of area: 40; impact energy: 31J. Hardox 450 welding, 35CrMnSi steel is used to manufacture medium speed, heavy load, high strength parts and high strength components, such as aircraft landing gear and high pressure blower blades. 35CrMnSi can partly replace the corresponding CrNi alloy steel in manufacturing small and medium section parts.

Based on the principle of “sincerity and win-win cooperation”, our company keeps forging ahead. In the fierce market competition, we have won the trust and rapid development of our customers with good cooperation and sincere service spirit. With pioneering spirit, the pursuit of excellence, continuous learning, and never satisfied content, we will create a win-win situation with our customers to create a better future. The company has sufficient inventory and complete varieties and specifications.