Grade standard of nm450 wear-resistance machinability

Since it was established in 2000. Based on the domestic rich standard of NM450 wear-resistance product resources and the great steel demand of the international market, our standard of NM450 wear-resistance service has already spread many countries in Europe , America, Southeast Asia, Middle East, South America, Africa, etc, and we have won an outstanding reputation for its professional exporting steel products

Our marine steel CCS Grade A hot rolled plates, standard of NM450 wear-resistance specification available now has 6*3300*4000, 5*1500*4500, 12*2700*9600, 9*3200*10400, 11*1790*7990, 6*3380*4600, 5*1500*11700, 12*2700*9000, 12.5*3390*9260, 13*1750*8400, 7*3620*9700, 12*2500*8350, 14.5*1830*6300, 15*3000*4200, 20*2750*5000, 7*1760*4250, 12*3000*10500, 12*3660*6070, 13*2000*4700, 13*2810*4100, 17*1910*7860, 12*2700*11450, 12*3800*9740.

For a ship, the choice of medium and thick ship plate is very important, it is an important part of the ship frame. The pressure bearing capacity of standard of NM450 wear-resistance, medium and thick ship plates is very strong. Secondly, because it is a ship plate, it must be driven in water, so of course the corrosion resistance is better, otherwise it will bring danger to buyers. Moreover, the service life of the ship will be increased. Regular inspection of the ship plate can ensure the safety of sailing. You can also know whether the ship plate is defective, so you don't have to worry about water seepage when you sail.

At present, there are many cutting methods for standard of NM450 wear-resistance steel plate cutting, such as common flame cutting, plasma cutting and laser cutting. Different cutting methods correspond to different cutting tools and cutting equipment. Therefore, based on this point, we can know that the answer to this question is yes, that is, there are many tools and equipment involved in standard of NM450 wear-resistance steel plate cutting, You can choose according to the cutting mode.

13CrMo4-5 seamless pipe is a kind of pressure resistant seamless pipe in accordance with the European standard EN 10216-2. The chemical composition of 13CrMo4-5 seamless pipe is C 0.10-0.17, Si ≤ 0.35, Mn 0.40-0.70, P ≤ 0.025, S ≤ 0.020, Cr 0.70-1.15, Ni ≤ 0.30, Mo 0.40-0.60, Al ≤ 0.04, Cu ≤ 0.03. Mechanical properties of 13CrMo4-5 seamless pipe: tensile strength: 440-590 MPa, yield strength: ≥ 290 MPa, elongation: ≥ 22%, impact energy: ≥ 40J. standard of NM450 wear-resistance, 13CrMo4-5 seamless pipe is used in petroleum, chemical industry, power station, boiler and so on industries.

The company conducts periodic and targeted training and guidance for after-sales service personnel. As the saying goes, "no one is perfect, no gold is red", to help after-sales service personnel improve service skills and correct service attitude. Carry out relevant technical training for after-sales service personnel, so that after-sales service practitioners have professional product knowledge.