5mm-100mm plate NM400 steel chemical element

NM400 steel chemical element, Q195 and Q235 belong to carbon structural steel, which are mainly used in buildings and engineering structures such as workshops, bridges, ships, etc. Of course, there are many differences between Q195 steel and Q235 steel. 1. Different components. The chemical composition of Q195 steel: C ≤ 0.12, Si ≤ 0.30, Mn ≤ 0.50, P ≤ 0.035, S ≤ 0.040. The chemical composition of Q235 steel: C ≤ 0.22, Si ≤ 0.35, Mn ≤ 1.40, P ≤ 0.045, S ≤ 0.050. 2. The prices of NM400 steel chemical element, Q235 steel is higher than that of Q195 steel. 3. The mechanical properties of Q195 and Q235 steel are different. The tensile strength of Q195 steel is ≥390 MPa, yield strength is ≥195 MPa, and the elongation is ≥ 30%. The tensile strength of Q235 steel is 490 MPa, yield strength is ≥235 MPa, and the elongation is 23%.

Different form NM400 steel chemical element, room temperature and medium temperature boiler steel shall have those advantages:Higher room temperature strength;Good impact toughness and low notch sensitivity;As the drum and other parts require a lot of cold deformation during processing, room temperature and medium temperature boiler steel must have good aging toughness;Good processing technology and welding performance;Good macrostructure, etc.

The advantages of flame cutting are simple cutting and low cost. The disadvantage of flame cutting is that when cutting thin plates, cutting deformation problems are prone to occur, and the materials that can be cut have certain limitations. The advantage of CNC cutting is that it can cut NM400 steel chemical element and any complex parts with high cutting accuracy. The disadvantage of CNC cutting is that there are certain operational and technical requirements.

Since its establishment, the company has participated in several key railway and highway projects. After years of development, the company’s NM400 steel chemical element domestic market has been exported to more than a dozen provinces and cities including Kunming, Shenzhen, Hunan, Sichuan, Shanghai, Nanjing, Heihe, Jilin, Inner Mongolia, and Xinjiang . International trade is exported to Kazakhstan, South Korea, Vietnam, South Africa and many other countries, and has been well received by customers.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.